Skip to content
Request a Demo

Solutions for Site Engineers

Your checklist goes with you to the 10th floor.

Your day is pours, checks, contractors and calls. digiQC puts the checklist for every stage of the work in your pocket. Take the photo, mark the check, ask for approval, and the record is done. No register to fill in at night: less effort, less stress, smart work instead of laborious work.

An engineer photographs a crack in a concrete wall with a phone during an inspection

The reality

The check takes minutes. The paperwork takes the evening.

You do the check on site. Then you write it in the register, send photos on WhatsApp and type the report at night. The same work, recorded three times.

And when a defect appears months later, the question is always: who checked this?

What goes wrong

The problems site engineers raise most

  1. Time

    The same work recorded three times

    Register, WhatsApp photos and the evening report, every day.

  2. Network

    No network where the work is

    Basements, remote sites and upper floors, where the signal drops.

  3. Proof

    Your good work is not on record

    When a defect is found later, nobody can show that you checked it right.

  4. Stress

    The form is in the office, the work is on the 10th floor

    Forget the printed checklist and you walk down, write it again and post it. Time, energy and trust are lost, and the stress goes up.

What changes

From three records to one

Today

Printed checklist, filled in later

With digiQC

Checklist on the phone, filled in at the point of work

Today

Photos sent on WhatsApp and lost in the chat

With digiQC

Live, geotagged photo attached to the check

Today

Notes written up at night

With digiQC

A voice note recorded at the checkpoint, with the check

Today

Approval chased by phone

With digiQC

Approval asked from the app, from checker to approver, each recorded with name and time

Today

Inspection requests made by a call to the site

With digiQC

RFIs raised and accepted on the phone, so the checklist opens when the work is ready

Today

No network, no record until you are back in the office

With digiQC

Recorded offline with the actual time, synced when the network returns

Quality, proven

Every check carries four proofs

This is what makes a site record something you can rely on.

  1. Who

    A named person

    Every check is made and approved by a named person.

  2. Where

    A live, geotagged photo

    Photos are taken live in the app at the point of inspection. Old photos cannot be uploaded.

  3. When

    The actual time of inspection

    Recorded even without internet, and synced when the network returns.

  4. What

    A record you can trust

    Inspections and issues cannot be backdated, lost or altered once submitted. Register entries stay editable, with a full audit trail of every change.

digiQC products

The products you use on site

Simple enough for every site engineer and contractor. If you can use WhatsApp, you can use digiQC, and it works without internet.

01

Inspect

Checklists for every stage of the work, completed at the point of work with live photos and a recorded approval.

Explore Inspect
02

Issue

Every non-conformance raised, assigned with a due date and closed only with photo proof of the fix.

Explore Issue
03

Register

Cube test results, pour registers, material test results and compliance records linked to the inspections they support, with an audit trail of every change.

Explore Register

Frequently asked

Questions site engineers ask

Does it work without internet?

Yes. Inspections are recorded offline with the actual time and sync when the network returns.

Can I upload a photo I took earlier?

No. Photos are taken live in the app at the point of inspection, with the location.

Is it hard to learn?

No. If you can use WhatsApp, you can use digiQC. Open the checklist, mark each point, take a live photo and ask for approval, even without internet. Site engineers rate it 4.7 on Google Play, and the digiQC Help Centre has guides if you need them.

Why does my company want this?

Your checks become proof the company can rely on years later, and problems are caught before they turn into rework.

How is digiQC priced?

digiQC works on subscription plans based on the number of users and projects in your company. Setup, training and support are included in the subscription.

See it on your project

Do the check once. Let the record do the rest.

Request a Demo

digiQC. Your quality partner.